3 Comments

Sound: *********
Value: *********
(Read about our ratings)

Measurements can be found by clicking this link.

Reviewers' ChoiceI’m gonna guess that as an audio enthusiast, you’re not that familiar with Edifier. Although the company makes the best under-$500/pair powered speaker I’ve ever tested or measured—the S1000MKII—it’s never really targeted audiophiles. But the new Stax Spirit S3 Bluetooth headphones seem tailor-made for SoundStage! Solo readers.

Edifier bought Stax Ltd.—a Japanese company famous for making expensive, audiophile-acclaimed electrostatic headphones—in late 2011. But it’s only now that Edifier is really capitalizing on the Stax name, with the new Stax Spirit brand, of which the S3 headphones ($399.99, all prices USD) are the first product.

Stax

Although the S3s, true to their name, carry on in the spirit of Stax, the only resemblance they have to Stax headphones is that they use a flat-panel driver—although it’s planar-magnetic rather than electrostatic. In fact, the S3s borrow their driver technology from Audeze, one of the best-known makers of planar-magnetic headphones. To compound the difference, the S3s cost only a fraction of the price of a set of Stax headphones, and they have Bluetooth.

The S3s are a closed-back design, only a little larger than a set of Bose noise-canceling headphones, so they’re travel-friendly. They incorporate Qualcomm’s Snapdragon Sound suite, a package of different technologies incorporating lossless CD-quality sound and the aptX HD and aptX Adaptive codecs, among other features (a good thing if you have an Android phone that includes those technologies). They’re rated for a run time of up to 80 hours. There’s a built-in microphone for phone calls. You can also use them in wired mode, although they have to be powered on—they won’t work at all with the power off. So I’d consider them part of the small but growing category of “portable audiophile headphones.”

In the box

The S3s include the headphones, a semi-hardshell travel case, a 50″ (1.25m) cable tipped with 1/8″ (3.5mm) plugs on each end, a 1/4″-to-1/8″ (6.3mm-to-3.5mm) adapter, and an extra set of earpads. The installed pads are covered with lambskin leather for a tight seal. The extras—which Edifier refers to as Ice Feeling Earmuffs—are covered in breathable fabric that has sort of a snakeskin texture. A triangular plastic pick is included to help you change out the pads.

Use

The S3s aren’t particularly large (especially for planar-magnetic headphones), but the earpads fit nicely over my somewhat oversized ears. Both sets of pads are comfortably soft. With only a multifunction button and volume up/down controls, the headphones are easy to operate.

Stax

Edifier supplies an app that lets you select different compensation curves (Leather and Ice Feeling) for the different sets of earpads, and also three EQ curves: Classic, Hi-Fi, and Stax. The app also accesses a low-latency Game Mode, and it lets you choose the double-tap and triple-tap functions of the multifunction button (in addition to on/off, which is always available with a single tap). The multifunction button can be set to turn Game Mode on or off, select among the EQ curves, call up your phone’s voice assistant, or play/pause.

Sound

I figured I’d better start by sorting out the differences between the earpads, and among the three different sound modes, so I could settle into the options I like best and dispense with the rest.

On first listen, I found the leather pads too boomy and punchy in the bass. When I switched to the fabric pads, the bass sounded much better controlled, although it did bring in what I thought was a little excess energy around 3kHz. But this was before I realized there was an app; without the app, the headphones default to the Leather mode. The Ice Feeling Earmuffs mode in the app made the fabric pads sound more like the leather pads, with louder and punchier bass, although it did tame the 3kHz peak somewhat. Although I was able to get used to the different earpad/mode combinations with time, I decided to make the Ice Feeling pads and the Leather mode my default listening choice.

Stax

With this setup in place, when I listened to that classic tonal balance test, Tracy Chapman’s “Fast Car” (Tracy Chapman, 16-bit/44.1kHz FLAC, Elektra/Asylum/Qobuz), I thought the default EQ mode—Classic—sounded well-balanced, but I tried the others. The Hi-Fi mode was treblier, and it lost some of the bass impact; it reminded me of some Grado and HiFiMan headphones I’ve tested. The Stax mode kicked the mids up a bit and reduced the bass, which to my ears had kind of a crude, mid-boosty sound. So I mostly stuck with Classic, but your tastes may differ. The nice thing is that the differences among all of these listening options are reasonably subtle—none of them solicited the “Why the hell did they do that?” response that involuntarily leaves my lips when I’m checking out headphones with a gratuitously large and varied selection of listening modes.

No matter how I had the headphones set up or which EQ mode I chose, many of the same characteristics were apparent: a generally flat response with just mild tonal balance tilts and no huge colorations, along with a nice, easy, natural sense of space.

For example, when I played the new album Off-Kilter by jazz trombonist John Yao’s Triceratops (16/44.1 WAV, See Tao Recordings), I found myself switching among the three EQ modes and liking certain things about each one. But in all of them, I heard a wonderful combination of a lifelike, small-studio sense of spaciousness and outstanding detail—but not detail produced by amping up the treble. On Yao’s tune “Quietly,” I loved hearing how clearly the double bass notes were defined and yet how full and powerful they sounded. Perhaps even more so, I enjoyed the fact that the headphones’ treble was so clean and realistic—every subtlety in the brushed snare drum and cymbals was readily apparent, and I even got some sense of above-the-head imaging from the ride cymbal.

Stax

I thought I might be more fussy if I listened to some vocal recordings, so I played James Taylor’s “Gaia,” a lush light-rock cut from Hourglass (16/44.1 FLAC, Columbia/Qobuz). I was bowled over by how good the sound was—even though I happened to have left the app in Hi-Fi mode, which I hadn’t liked as much with “Fast Car.” The headphones conjured up a colossal sound, especially with the backing vocals and the surprise tom hits that power their way into the tune at 4:10. Taylor’s voice had the exact warm, smooth tone he’s loved for, and Branford Marsalis’s soprano sax soloing floated about 50′ above the mix, as if it were coming from a balcony above the stage in a large theater.

The S3s performed just as well with more typical audiophile fare, such as Hilary Hahn Plays Higdon & Tchaikovsky Violin Concertos (24/88.2 FLAC, Deutsch Grammophon / Qobuz). I loved the way composer Jennifer Higdon’s “Chacconi”—mostly ethereal string backing behind Hahn’s soaring violin—seemed almost to float outside the headphones; I felt like I was sitting front row, dead center, with Hahn and the orchestra above me and stretching out to the right and left. Again, the S3s delivered a fantastic sense of space without hyping up the treble; when the rest of the orchestra came in full blast at around 7:00, the acoustics of the recording space really “lit up” through the S3s. The strings, at triple-forte, did sound a little strained, perhaps a combination of necessarily aggressive limiting in the recording, along with the artifacts introduced by Bluetooth data compression; through the Røde NTH-100 studio headphones, plugging straight into the same Samsung phone (and thus bypassing Bluetooth), the limiting was still evident, but some of the harshness was gone.

Stax

This reminded me that I hadn’t listened to the headphones with the supplied cable, so I plugged it in and listened to the same piece. I thought the headphones sounded smoother and more dynamic through Bluetooth, which is pretty weird, especially considering the headphones’ internal amplifiers must be on to use them in cabled mode. Maybe my measurements (available from the link at the top of the page) will shine some light on this mystery.

Comparison

Probably the headphones that, for me, would be most clearly targeted at the same market as the S3s are the HiFiMan Deva Pros ($329). The Deva Pros have Bluetooth (although through an adapter), and they employ planar-magnetic drivers, so they have some things in common with the S3s—although the Deva Pros are an open-back design.

On Cécile McLorin Salvant’s version of “Wives and Lovers” (For One to Love, 24/96 FLAC, Mack Avenue / Qobuz), the Deva Pros’ bass seemed rather soft and plodding on the double-bass line, and the vocals sounded a little peaky and bright in the 3kHz range. In all three EQ modes, the S3s’ bass sounded more controlled—clearly so in the Hi-Fi and Stax modes, but closer to the Deva Pros in the Classic mode. The vocals didn’t exhibit that peakiness with the S3s, although they did sound slightly dull in Classic mode. The Deva Pros had a somewhat bigger—but less focused—sense of space; hearing them compared with the S3s was like comparing a set of electrostatic panel speakers to a set of well-engineered cones’n’domes dynamic speakers.

I happened to have my dead-on-Harman-curve AKG K371 headphones ($149) sitting around, so even though they’re not Bluetooth, I thought I’d plug them straight into my phone and see how they compared to the S3s. Pretty favorably, as it turned out. I’d say the K371s’ clarity and balance were equal to that of the S3s (remembering here that the S3s were handicapped, at least theoretically, by the Bluetooth connection). Where the S3s gained an advantage was in the sense of space; it wasn’t radically better than what I heard with the K371s, but I did get a larger sense of reverberance.

Conclusion

I think the Stax Spirit S3s are the best option available for audiophile sound on the go. They’re affordable, they’re comfortable, and they get you pretty close to the sound of the very best audiophile headphones. But you can toss them in a bag and hit the subway, or walk the dog without getting the leash tangled in the headphone cable, or basically take them wherever you want to go.

. . . Brent Butterworth
This email address is being protected from spambots. You need JavaScript enabled to view it.

Associated Equipment

  • Smartphone: Samsung Galaxy S10

Edifier Stax Spirit S3 Bluetooth Headphones
Price: $399.99.
Warranty: One year.

Edifier
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.
Website: www.edifier.com

Say something here...
You are a guest ( Sign Up ? )
or post as a guest
People in conversation:
Loading comment... The comment will be refreshed after 00:00.
  • This commment is unpublished.
    SimonT · 9 months ago
    thanks Brett for a very informative and well written review. I got the S3s and am rather enjoying them. Though they are a little hot - I guess I can never get used to closed back cans (using PortaPros for decades). The S3 sounds really good and is not too heavy though at 100 grams less, they would really  take the cake. 
  • This commment is unpublished.
    Joe Werner · 2 years ago
    Can you compare with the Oppo PM-3s and THX Pandas?


    I realize you may not have them any more but maybe you still remember them or can comment based on your measurements. 


    I have the pm-3s with a Fiio btr-3 velcroed to the side for bluetooth, and I had the Pandas until the hinges started loosening and I returned them before it was too late. 
    • This commment is unpublished.
      Brent Butterworth · 2 years ago
      I haven't heard the Oppos in years, and the THX Pandas I sent to another reviewer, so I can't run a test on these. But here's the measurements, with the AKG K371 (Harman curve) thrown in -- all using wired connection, not BT. The Oppos definitely look the smiliest (i.e., bass and treble boosted), but I can't predict which of these you'd like the best. All are very good, tho.
      • This commment is unpublished.
        Joe Werner · 2 years ago
        I looked at the overlaid curves in the graph that you attached. The Edifier S3 curve does not look quite like the ones in the article. For example, there is no peak at 8 KHz.
         Can you confirm that you used leather pads, wired, and used Leather Pads equalization?
        Were these measurements made using white noise and spectrum analyzer?

        Some of the other curves look a little different. Maybe the smoothing is different.
  • This commment is unpublished.
    AmyDazz · 2 years ago
    I noted you're using Samsung Galaxy S10 which may be obsolete by now. Perhaps you should try newer phones with better bluetooth audio codecs such as Aptx Adaptive with Snapdragon Sound.

Latest Comments

a href="https://bestserviceis 19 hours ago Technics EAH-AZ70W True Wireless Earphones

Istanbul is a city that offers a perfect blend of history, culture, and world-class services. ...
If you love music and want to experience it like never before, I’d definitely recommend ...
I’ve been using the Sanwear GT earbuds from San Sound for almost a year now, ...
end of tenancy cleaning price 2 days ago Technics EAH-AZ70W True Wireless Earphones
End of tenancy cleaning prices are designed to be affordable and fair, ensuring that tenants ...
Hi Brent and David, I ordered your new headphone test album back on the Halloween ...
Man I ran a set of these headphones as A Bluetooth speaker and they go ...
headphonejack 2 months ago Is Accuracy the Only Option?
Is accuracy measurable? What do you consider the most accurate headphones? Or maybe top 5?
Doug Schneider 2 months ago Is Accuracy the Only Option?
It's an interesting point that's made. The only thing I'll say contrary is that with ...
Doug Schneider 3 months ago PSB M4U 9 Headphones
@steve pageThis problem is an interesting one. If you see this post, let us know what ...
Doug Schneider 3 months ago The Rise and Fall and Maybe Rise Again of MQA
@AndrewI don't know who was actually employed, but I have to say that the original ...